To Main Site
ethirteen support Help Center home page

Support Hub

  1. Home
  2. Support
  1. ethirteen support
  2. CRANKS & BB's
  3. FAQ

Articles in this section

  • Does the XCX crankset come with crank boots and/or chainline spacers?
  • What lockring tool do I need to change my e*thirteen chainring on my Shimano™️ Steps™️ motor?
  • The o-ring found between the chainring and lockring on Bosch G4 systems is missing with my e*spec ring. Is that correct?
  • What crank/ring configuration do I need for super-boost?
  • Crank offset, Q factor and frame fit
  • Bottom Bracket Standards Explained
  • Can I use your threaded BB to run BB30 cranks on my threaded frame?
  • Can I use a different brand's BB with your cranks?
  • Can I use your cranks on my PF30, BB30 or BB92 frame?
  • Do I need to use my pedal washers?
See more

What is the bolt circle diameter (BCD) for e*thirteen cranks?

Charlie
  • April 08, 2015 17:38
  • Updated
Follow

All of our cranks and crank mounted bashguards, with the exception of our Quick Connect rings of course, use a 104mm 4 bolt BCD pattern.


  • Facebook
  • Twitter
  • LinkedIn
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Return to top

Related articles

  • 2019/2020 Crankset User Manual - Setup All Cranks and Bottom Brackets
  • How to install and remove 2019/2020 CS4 XCX, TRS & LG1 Race and CS3 TRS & LG1 Plus cranks
  • Your cranks use a 30mm spindle, does that mean they are BB30?
  • What crank/ring configuration do I need for super-boost?
  • How do I remove a Quick Connect Guidering from my e*thirteen crankset?

Comments

0 comments

Please sign in to leave a comment.

© 2020 e*thirteen. all rights reserved.
  • Facebook
  • Instagram