Support Hub

Home
Support

ethirteen support
WARRANTY INFO - TECH SERVICE BULLETINS - LEGACY
Legacy Tech Articles

Articles in this section

Ex Cog Troubleshooting guide
12s Upgrade: How to install derailleur pulley spacers
12s Upgrade: How to install your 12s TRS Plus cassette
12s Upgrade: How to install your 12s X1™, GX™, or XO1™ shifter ratchet
Are TRS race cassette parts compatible with TRS+ cassettes?
Can buy the TRS Plus 12 speed Upgrade Kit system and run the cassette and chain on my current 12s SRAM™ system?
Can I use the 40 tooth (40t) EX Cog on my 36 tooth cassette?
Can I use the 42 tooth (42t) EX Cog with a 34 tooth cassette?
Chainguide - Gen 1 Chainguide Approved Lubricants
Chainguide - Gen 1 LG1+ chainguide service part diagram

See more

Hub - How to Replace Angular Contact Rear Hub Bearings in LG1+ and TRS+ hubs

Charlie

January 28, 2025 21:52
Updated

How to Replace Angular Contact Rear Hub Bearings in LG1+ and TRS+ hubs

Facebook
Twitter
LinkedIn

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Return to top

Related articles

What bearings do I need for my front hub?
How to replace e*thirteen SL rear hub shell bearings
e*thirteen Rear Hubs - Produced 2017 To 2024
Hub - Generation 2 axle - TRSr/TRS+/LG1+ rear hub axle install and removal
Are bearings in e*thirteen LG1 DH integrated 7 speed drivers serviceable/replaceable?

© 2020 e*thirteen. all rights reserved.

Facebook
Instagram