To Main Site
ethirteen support Help Center home page

Support Hub

  1. Home
  2. Support
  1. ethirteen support
  2. CRANKS & BB's
  3. How-to guides

Articles in this section

  • Bottom bracket standards
  • How to install and remove TRS crank spiders and integrated rings
  • How to install BB30 bottom brackets
  • How to install BB92 Bottom Brackets
  • How to install PF30 bottom brackets
  • How to re-grease bottom bracket bearings
  • How to replace gen 3 BB bearings
  • How to install an APS adjuster
  • How to install and remove 2018 CS3 TRS and LG1 race cranks
  • How to install and remove 2019/2020 CS4 XCX, TRS & LG1 Race and CS3 TRS & LG1 Plus cranks
See more

How to install an APS adjuster

Chris Costello
  • July 15, 2020 18:56
  • Updated
Follow

This guide shows how to assemble and install all generations of APS adjusters. Even if the outer ring of your APS adjuster looks different than the version shown here, this guide still applies to your system as well.

How to install an APS adjuster


  • Facebook
  • Twitter
  • LinkedIn
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Return to top

Related articles

  • How to install and remove 2019/2020 CS4 XCX, TRS & LG1 Race and CS3 TRS & LG1 Plus cranks
  • How to install and remove 2018 CS3 TRS and LG1 race cranks
  • How to install TRS and LG1 series cranks using APS adjuster
  • How to install and remove TRS crank spiders and integrated rings
  • 2019/2020 Crankset User Manual - Setup All Cranks and Bottom Brackets

Comments

0 comments

Article is closed for comments.

© 2020 e*thirteen. all rights reserved.
  • Facebook
  • Instagram